Research Article | | Peer-Reviewed

Gas Composition Tracking in a Transient Pipeline Using the Method of Characteristics

Received: 6 May 2024     Accepted: 17 June 2024     Published: 19 June 2024
Views:       Downloads:
Abstract

For a gas pipeline with multiple gas sources, the significance of tracking the composition of natural gas is increasing with the implementation of X+1+X system for the natural gas industry in China. Mathematically, the tracking problem is usually described by a system of partial differential equations (PDEs). The continuity equation on gas composition has been developed to track natural gas composition according to the law of mass conservation. The algorithm resulting from the method of characteristics (MOC) is proposed to solve the system of PDEs. Compared to the original MOC, numerical solutions of the continuity equation on gas composition are obtained after the hydraulic calculation and thermal calculation. Moreover, different combinations of boundary conditions for the MOC are derived, which could expand the range of application of the MOC and be applicable to various operating conditions. The heating values of diverse gas sources have been determined following the methods documented in ISO 6976:2016. The case study of a gas pipeline in China verified the validity of the algorithm via the commercial simulation software Pipeline Studio for Gas (TGNET). The heating value and gas composition obtained by the algorithm can be used in the custody transfer metering of natural gas pipelines for Class B and C metering stations described in GB/T 18603−2014.

Published in American Journal of Energy Engineering (Volume 12, Issue 2)
DOI 10.11648/j.ajee.20241202.12
Page(s) 32-42
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Gas Composition Tracking, MOC, Combination of Boundary Conditions, Heating Value, Step Marching Method

References
[1] Wei C, Tianbo Y, Changwu L, Likai H, Fubing B, Jinchun, N. Advancements in the Natural Gas Measurement System Under a Multi-Source Scenario: A Domestic and International Perspective [J]. Metrology Science and Technology, 2024, 68(1): 3-9, 75.
[2] Guandalini G, Colbertaldo P, Campanari S. Dynamic modeling of natural gas quality within transport pipelines in presence of hydrogen injections. Applied Energy. 2017, 185: 1712-1723.
[3] Guandalini G, Colbertaldo P, Campanari S. Dynamic Quality Tracking of Natural Gas and Hydrogen Mixture in a Portion of Natural Gas Grid. Energy Procedia. 2015, 75: 1037-1043.
[4] Chaczykowski M, Zarodkiewicz P. Simulation of natural gas quality distribution for pipeline systems. Energy. 2017, 134: 681-698.
[5] Chaczykowski M, Sund F, Zarodkiewicz P, et al. Gas composition tracking in transient pipeline flow. Journal of Natural Gas Science and Engineering. 2018, 55: 321-330.
[6] Osiadacz A J, Chaczykowski M. Modeling and Simulation of Gas Distribution Networks in a Multi-energy System Environment. Proceedings of the IEEE. 2020, 108(9): 1580-1595.
[7] Fan D, Gong J, Zhang S, et al. A transient composition tracking method for natural gas pipe networks. Energy. 2021, 215: 119131.
[8] Fan D, Study on Transient Simulation and Composition Tracking in Natural Gas Condensate Pipeline Network. Doctoral Dissertation. China University of China, Beijing. 2021, pp. 75-83.
[9] Urh, M, Pantoš, M. Gas composition tracking feasibility using transient finite difference θ-scheme model for binary gas mixtures. International Journal of Hydrogen Energy, 2024, 49, 1319-1331.
[10] Bermúdez, A, Shabani, M. Numerical simulation of gas composition tracking in a gas transportation network. Energy, 2022, 247, 123459.
[11] Bermúdez, A, Shabani, M. Finite element solution of isothermal gas flow in a network. Journal of Computational Physics, 2019, 396, 616-652.
[12] Behbahani-Nejad, M, Bermúdez, A, Shabani, M. Finite element solution of a new formulation for gas flow in a pipe with source terms. Journal of Natural Gas Science and Engineering, 2019, 61, 237-250.
[13] Zihang Z, Saedi, I, Mhanna, S, Wu, K, Mancarella, P. Modelling of gas network transient flows with multiple hydrogen injections and gas composition tracking. International Journal of Hydrogen Energy, 2022, 47(4), 2220-2233.
[14] Wang, C, Zhou, D, Xiao, W, Shui, C, Ma, T, Chen, P, Yan, J. Research on the dynamic characteristics of natural gas pipeline network with hydrogen injection considering line-pack influence. International Journal of Hydrogen Energy, 2023, 48(65), 25469-25486.
[15] Mohitpour, M, Golshan, H, Murray, A. Pipeline Design & Construction: A Practical Approach, Third Edition. ASME Press, 2007, pp. 263-268.
[16] Starling K E. Fluid Thermodynamic Properties for Light Petroleum Systems. Houston: Gulf Publishing Company. 1973, pp. 1-3, 220-223.
[17] Gnedin, N. Y., Semenov, V. A., Kravtsov, A. V. Enforcing the Courant–Friedrichs–Lewy condition in explicitly conservative local time stepping schemes. Journal of Computational Physics, 2018, 359, 93-105.
[18] Thorley, A. R. D., Tiley, C. H. Unsteady and transient flow of compressible fluids in pipelines—A review of theoretical and some experimental studies. International journal of heat and fluid flow, 1987, 8(1), 3-15.
[19] Weihe H, Honggang C, et al. Energy measurement method of annular pipeline network with multi-gas sources based on operation simulation. Chemical Engineering of Oil & Gas, 2022, 51(5): 117-123.
[20] Qian C, Aocheng G, Feng C, F, et al. A transient gas pipeline network simulation model for decoupling the hydraulic-thermal process and the component tracking process. Energy, 2024, 131613.
Cite This Article
  • APA Style

    Qi, D., Wu, C., Liu, Z., Zuo, L. (2024). Gas Composition Tracking in a Transient Pipeline Using the Method of Characteristics. American Journal of Energy Engineering, 12(2), 32-42. https://doi.org/10.11648/j.ajee.20241202.12

    Copy | Download

    ACS Style

    Qi, D.; Wu, C.; Liu, Z.; Zuo, L. Gas Composition Tracking in a Transient Pipeline Using the Method of Characteristics. Am. J. Energy Eng. 2024, 12(2), 32-42. doi: 10.11648/j.ajee.20241202.12

    Copy | Download

    AMA Style

    Qi D, Wu C, Liu Z, Zuo L. Gas Composition Tracking in a Transient Pipeline Using the Method of Characteristics. Am J Energy Eng. 2024;12(2):32-42. doi: 10.11648/j.ajee.20241202.12

    Copy | Download

  • @article{10.11648/j.ajee.20241202.12,
      author = {Da Qi and Changchun Wu and Zhe Liu and Lili Zuo},
      title = {Gas Composition Tracking in a Transient Pipeline Using the Method of Characteristics
    },
      journal = {American Journal of Energy Engineering},
      volume = {12},
      number = {2},
      pages = {32-42},
      doi = {10.11648/j.ajee.20241202.12},
      url = {https://doi.org/10.11648/j.ajee.20241202.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajee.20241202.12},
      abstract = {For a gas pipeline with multiple gas sources, the significance of tracking the composition of natural gas is increasing with the implementation of X+1+X system for the natural gas industry in China. Mathematically, the tracking problem is usually described by a system of partial differential equations (PDEs). The continuity equation on gas composition has been developed to track natural gas composition according to the law of mass conservation. The algorithm resulting from the method of characteristics (MOC) is proposed to solve the system of PDEs. Compared to the original MOC, numerical solutions of the continuity equation on gas composition are obtained after the hydraulic calculation and thermal calculation. Moreover, different combinations of boundary conditions for the MOC are derived, which could expand the range of application of the MOC and be applicable to various operating conditions. The heating values of diverse gas sources have been determined following the methods documented in ISO 6976:2016. The case study of a gas pipeline in China verified the validity of the algorithm via the commercial simulation software Pipeline Studio for Gas (TGNET). The heating value and gas composition obtained by the algorithm can be used in the custody transfer metering of natural gas pipelines for Class B and C metering stations described in GB/T 18603−2014.
    },
     year = {2024}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Gas Composition Tracking in a Transient Pipeline Using the Method of Characteristics
    
    AU  - Da Qi
    AU  - Changchun Wu
    AU  - Zhe Liu
    AU  - Lili Zuo
    Y1  - 2024/06/19
    PY  - 2024
    N1  - https://doi.org/10.11648/j.ajee.20241202.12
    DO  - 10.11648/j.ajee.20241202.12
    T2  - American Journal of Energy Engineering
    JF  - American Journal of Energy Engineering
    JO  - American Journal of Energy Engineering
    SP  - 32
    EP  - 42
    PB  - Science Publishing Group
    SN  - 2329-163X
    UR  - https://doi.org/10.11648/j.ajee.20241202.12
    AB  - For a gas pipeline with multiple gas sources, the significance of tracking the composition of natural gas is increasing with the implementation of X+1+X system for the natural gas industry in China. Mathematically, the tracking problem is usually described by a system of partial differential equations (PDEs). The continuity equation on gas composition has been developed to track natural gas composition according to the law of mass conservation. The algorithm resulting from the method of characteristics (MOC) is proposed to solve the system of PDEs. Compared to the original MOC, numerical solutions of the continuity equation on gas composition are obtained after the hydraulic calculation and thermal calculation. Moreover, different combinations of boundary conditions for the MOC are derived, which could expand the range of application of the MOC and be applicable to various operating conditions. The heating values of diverse gas sources have been determined following the methods documented in ISO 6976:2016. The case study of a gas pipeline in China verified the validity of the algorithm via the commercial simulation software Pipeline Studio for Gas (TGNET). The heating value and gas composition obtained by the algorithm can be used in the custody transfer metering of natural gas pipelines for Class B and C metering stations described in GB/T 18603−2014.
    
    VL  - 12
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Sections